Icon HelpCircleForumIcon Link

⌘K

Icon HelpCircleForumIcon Link
Docs /
Node Operator /
Fuel Sequencer /
Testnet Node

Icon LinkRun Sequencer Node

Icon LinkPrerequisites

This guide assumes that Golang is installed to run Cosmovisor. We recommend using version 1.21 or later. You can download it here Icon Link.

Icon LinkRun the Node

Obtain binary and genesis from this repository:

Download the right binary based on your architecture to $GOPATH/bin/ with the name fuelsequencerd:

  • echo $GOPATH to ensure it exists. If not, go might not be installed.
  • mkdir $GOPATH/bin/ if the directory does not exist.
  • wget <url/to/binary> to download the binary, or any equivalent approach.
  • cp <binary> $GOPATH/bin/fuelsequencerd

Try the binary: 

fuelsequencerd version  # expect seq-testnet-2-improved-sidecar

Initialise node directory: 

fuelsequencerd init <node-name> --chain-id seq-testnet-2

Copy the downloaded genesis file to ~/.fuelsequencer/config/genesis.json: 

cp <path/to/genesis.json> ~/.fuelsequencer/config/genesis.json

Configure the node (part 1: ~/.fuelsequencer/config/app.toml):

  • Set minimum-gas-prices = "10test".
  • Configure [sidecar]:
    • Ensure that enabled = false.

Configure the node (part 2: ~/.fuelsequencer/config/config.toml):

  • Configure [p2p]:
  • Configure [mempool]:
    • Set max_tx_bytes = 1153434 (1.1MiB)
    • Set max_txs_bytes = 23068670 (~22MiB)
  • Configure [rpc]:
    • Set max_body_bytes = 1153434 (optional - relevant for public RPC).
Icon InfoCircle

Note: Ensuring consistent CometBFT mempool parameters across all network nodes is important to reduce transaction delays. This includes mempool.size, mempool.max_txs_bytes, and mempool.max_tx_bytes in config.toml Icon Link and minimum-gas-prices in app.toml Icon Link, as pointed out above.

Icon LinkInstall Cosmovisor

To install Cosmovisor, run go install cosmossdk.io/tools/cosmovisor/cmd/cosmovisor@latest

Set the environment variables: 

echo "# Setup Cosmovisor" >> ~/.zshrc
echo "export DAEMON_NAME=fuelsequencerd" >> ~/.zshrc
echo "export DAEMON_HOME=$HOME/.fuelsequencer" >> ~/.zshrc
echo "export DAEMON_ALLOW_DOWNLOAD_BINARIES=true" >> ~/.zshrc
echo "export DAEMON_LOG_BUFFER_SIZE=512" >> ~/.zshrc
echo "export DAEMON_RESTART_AFTER_UPGRADE=true" >> ~/.zshrc
echo "export UNSAFE_SKIP_BACKUP=true" >> ~/.zshrc
echo "export DAEMON_SHUTDOWN_GRACE=15s" >> ~/.zshrc

# You can check https://docs.cosmos.network/main/tooling/cosmovisor for more configuration options.

Apply to your current session: source ~/.zshrc 

echo "# Setup Cosmovisor" >> ~/.bashrc
echo "export DAEMON_NAME=fuelsequencerd" >> ~/.bashrc
echo "export DAEMON_HOME=$HOME/.fuelsequencer" >> ~/.bashrc
echo "export DAEMON_ALLOW_DOWNLOAD_BINARIES=true" >> ~/.bashrc
echo "export DAEMON_LOG_BUFFER_SIZE=512" >> ~/.bashrc
echo "export DAEMON_RESTART_AFTER_UPGRADE=true" >> ~/.bashrc
echo "export UNSAFE_SKIP_BACKUP=true" >> ~/.bashrc
echo "export DAEMON_SHUTDOWN_GRACE=15s" >> ~/.bashrc

# You can check https://docs.cosmos.network/main/tooling/cosmovisor for more configuration options.

Apply to your current session: source ~/.bashrc

You can now test that cosmovisor was installed properly: 

cosmovisor version

Initialise Cosmovisor directories (hint: whereis fuelsequencerd for the path): 

cosmovisor init <path/to/fuelsequencerd>

At this point cosmovisor run will be the equivalent of running fuelsequencerd, however you should not run the node for now.

Icon LinkConfigure State Sync

State Sync allows a node to get synced up quickly.

To configure State Sync, you will need to set these values in ~/.fuelsequencer/config/config.toml under [statesync]:

  • enable = true to enable State Sync
  • rpc_servers = ...
  • trust_height = ...
  • trust_hash = ...

The last three values can be obtained from the explorer Icon Link.

You will need to specify at least two comma-separated RPC servers in rpc_servers. You can either refer to the list of alternate RPC servers above or use the same one twice.

Icon LinkRunning the Sequencer

At this point you should already be able to run cosmovisor run start to run the Sequencer. However, it is highly recommended to run the Sequencer as a background service.

Some examples are provided below for Linux and Mac. You will need to replicate the environment variables defined when setting up Cosmovisor.

Icon LinkLinux

On Linux, you can use systemd to run the Sequencer in the background. Knowledge of how to use systemd is assumed here.

Here's an example service file with some placeholder (<...>) values that must be filled-in: 

[Unit]
Description=Sequencer Node
After=network.target

[Service]
Type=simple
User=<USER>
ExecStart=/home/<USER>/go/bin/cosmovisor run start
Restart=on-failure
RestartSec=3
LimitNOFILE=4096

Environment="DAEMON_NAME=fuelsequencerd"
Environment="DAEMON_HOME=/home/<USER>/.fuelsequencer"
Environment="DAEMON_ALLOW_DOWNLOAD_BINARIES=true"
Environment="DAEMON_LOG_BUFFER_SIZE=512"
Environment="DAEMON_RESTART_AFTER_UPGRADE=true"
Environment="UNSAFE_SKIP_BACKUP=true"
Environment="DAEMON_SHUTDOWN_GRACE=15s"

[Install]
WantedBy=multi-user.target

Icon LinkMac

On Mac, you can use launchd to run the Sequencer in the background. Knowledge of how to use launchd is assumed here.

Here's an example plist file with some placeholder ([...]) values that must be filled-in: 

<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
    <key>Label</key>
    <string>fuel.sequencer</string>

    <key>ProgramArguments</key>
    <array>
        <string>/Users/[User]/go/bin/cosmovisor</string>
        <string>run</string>
        <string>start</string>
    </array>

    <key>UserName</key>
    <string>[User]</string>

    <key>EnvironmentVariables</key>
    <dict>
        <key>DAEMON_NAME</key>
        <string>fuelsequencerd</string>
        <key>DAEMON_HOME</key>
        <string>/Users/[User]/.fuelsequencer</string>
        <key>DAEMON_ALLOW_DOWNLOAD_BINARIES</key>
        <string>true</string>
        <key>DAEMON_LOG_BUFFER_SIZE</key>
        <string>512</string>
        <key>DAEMON_RESTART_AFTER_UPGRADE</key>
        <string>true</string>
        <key>UNSAFE_SKIP_BACKUP</key>
        <string>true</string>
        <key>DAEMON_SHUTDOWN_GRACE</key>
        <string>15s</string>
    </dict>

    <key>KeepAlive</key>
    <dict>
        <key>SuccessfulExit</key>
        <false/>
    </dict>

    <key>HardResourceLimits</key>
    <dict>
        <key>NumberOfFiles</key>
        <integer>4096</integer>
    </dict>

    <key>StandardOutPath</key>
    <string>/Users/[User]/Library/Logs/fuel-sequencer.out</string>
    <key>StandardErrorPath</key>
    <string>/Users/[User]/Library/Logs/fuel-sequencer.err</string>
</dict>
</plist>

Icon LinkReferences

Based on material from: